Eccentric iron bushings are provided for those owners who need to lift but do not want to replace the bracket.

Mounted on the factory bull legs, used to return your suspension angle to caster after a lift, this will keep your coil springs straight up and down, allowing them to fully perform and improve the overall handling of your vehicle.

Two in a set

JB43/JB74
Use two for a lift of 20-25mm
Use four for a lift of 40-60mm

Note: When installing, remove the original bracket iron sleeve and install the GIZ eccentric iron sleeve

The most economical way to adjust the front axle caster angle without replacing the bull leg

You only need to replace the bushing to adjust the front axle caster angle to the required angle

100% made in Taiwan

Disadvantages
1. Long construction time and inconvenience
2. Reduced off-road drop
3. Limited shock absorption space for the bushing
4. Not recommended for owners with a lift of more than 60mm