The rear shock absorber extension mount is specially designed for the Hilux series. As the pickup trucks are getting taller and taller, the shock absorber length should also be extended.

When your car is taller than the original one (such as installing an extended hanging ear), but you don’t want to replace the shock absorber, you can first consider installing the GIZ shock absorber extension mount to help you extend the length of your shock absorber.

The GIZ shock absorber extension has a 90-degree rotation design, which can make your car's suspension movement angle smoother (the principle is similar to that of a cross drive shaft) and greatly reduce the chance of shock absorber bending, axle oil leakage or base breakage, which is especially evident on pickup trucks that are raised by more than 2 inches. The 90-degree rotation design also allows the shock absorber knob to be in a position that is more convenient for adjustment.

The upward design allows you to install a larger shock absorber without hitting the ground axis, and increases the height from the ground, reducing the chance of shock absorber damage.

One set includes shock absorber extension seat x2

1. The easiest way to increase the total length of the shock absorber

2. Can be used with extended hanging ears or double joints

3. Prevent the shock absorber from colliding with the ground axis

4. Upward design - can install larger shock absorbers

5. 90-degree transfer design - smoother suspension angle and increased shock absorption performance

6. Better adjustment of shock absorber damping

7. Made of high-strength metal

8. Rust-proof surface treatment

9. Made in Taiwan

Notes
1. Installation needs to be done by a professional technician

2. Be sure to keep the appropriate length of the brake hose and cable set

3. The matching needs to refer to the advice of professional technicians

4. Incorrect matching will cause the shock absorber to bottom out and be damaged